Amewi AMXRock Horse Crawler 4WD 1:10 ARTR Metallic Grey

Based on the famous CrossTrail CT10 chassis, we present another highlight of Crawler - our 1:10 scale horse reminiscent of a current SUV. Additional optimizations have been made to the control: for example, the winch can now be sensitively controlled in both directions via the transmitter. The switchable lighting module can be switched on and off by a button on the remote control. For a slightly faster ride, we replaced the Crawler 45T engine with a 35T engine to increase top speed in second gear without compromising drag capacity. The engine is still controlled by the famous Hobbywing WP-1060 brushed regulator with Mountainbreak, which can be adjusted very delicately. The remote control has not only been visually redesigned, but also has new features. We have integrated the winch under the body so that the appearance of the model is not affected. Thanks to the specially designed shock absorbers, the Crawler easily glides over any obstacle, whether it's stony terrain, bumpy roads or sandy hills. Gantry shafts with metal gears and CVD drive shafts provide greater ground clearance, while the 2-speed transmission and individual differential locks ensure optimal climbing performance. The enclosed inlet tray protects against water and dirt, so you can ride with your horse through puddles and mud without worry. Available in ARTR version, the vehicle comes with a modern 2.4GHz 6-channel remote control. The large battery compartment offers the possibility of using 6000-7000mAh batteries to make off-road fun flexible according to your preferences. The choice of battery can be made between Ni-MH or Li-Po batteries, adjustment is made on the regulator by changing a jumper (small black external plug). Highlights: gantry axles with greased metal gears and CVD drive shafts: for more ground clearance and more power on the wheels, the vehicle's terrain characteristics are significantly improved and the durability of the transmission components is increased (less wear, better life). 2-Speed Transmission & Individual Differential Locks Installed on Vehicle - Both functions can be controlled separately from the transmitter, off-road capability and endurance. The development of the model increases significantly to be able to drive even on very difficult terrain. Climbing properties are enhanced with blocked differentials and, in first gear, transmitter-controllable high-torque rope winches - installed under the model body to master accidental slopes or other vehicles in adverse places such as mud, etc. Other features: LED front and rear light with turn signals on mirrors, brake lights, reverse lights and roof lights, functional and switchable via the emitter hood with folding mechanism and additional pins on the front, suitable for preventing accidental opening of the body, e.g. in case of accidents on steep terrain, many scale accessories such as door handles, roof bars, exterior and interior mirrors. Trailer already assembled. Hook and shackle as well as a complete spare wheel ready to use on the frame and bodywork. Solid aluminium frame. Metal Differentials Telescopic drive shafts for unlimited freedom of movement and permanent transmission in all drag areas (tangling axles on uneven terrain). Large battery compartment with security, also for large batteries from 6000 to 700 00 mAh for example. 7.2 or 7.4 V (driving times more than two hours or more) Technical data: Scale: 1:10 Length: 568 mm Width: 250 mm Height: 255 mm Weight (without battery): 3800 g Wheelbase: 313 mm Front track width: 7.95 3 .000 in. Rear track width: 202.00 mm. Ground clearance: 55 mm. Front wheels: outer diameter / width 118 / rear wheels 45 mm. Outer diameter/width 118/45mm Rim diameter: 51 mm. Transmission: 2 speed Metal transmission. 1. Gear ratio: 25.85:1 Speed: 64.6:1 Front shock absorber: 90mm Aluminum oil damper with knurled nut to adjust spring prestressed; Rear shock absorber: 90mm aluminum oil damper with knurled nut to adjust spring pretension; Brake: electronic with brake Mountain (Mountainbreak) ) Regulator: Hobbywing WP106000 60A Motor Brushed: 55mm, 40cm, Hed 35T Chest. Transmission system: Servo gimbal: standard MG 25 kg. Main Material: Plastic Battery compartment dimensions: 160 x 45 x 25 mm. Driving time: depending on the selected battery capacity up to approx. 120 minutes Maximum speed: approx. 18 km/h in second gear. Remote Control: 6 2.4 GHz channels, range: about 100 minutes. Box contents: remote control model, various accessories, instruction manual in German and English. Necessary accessories: 4 x AAA micro batteries for the remote control (NiMh 7.2 V or LiPo 7.4 V), recommended from approx. 3000 mAh, Deans connector suitable for the batteries mentioned above

• Gantry axles with greased metal gears and CVD drive shafts: for more ground clearance and more force on wheels, the vehicle's terrain characteristics are significantly improved and the durability of the transmission components is increased (less wear, better life)
• 2-speed transmission and individual differential locks installed on the vehicle - both functions can be controlled separately from the transmitter, off-road capabilities and model power development are significantly increased so that they can be driven even on very difficult terrain. Climbing properties are significantly improved with locked differentials and on the first gear
• Functional and controllable winch from transmitter: installed under the model body to master accidental slopes or other vehicles in unfavorable places such as mud, etc. to be released
• Front/rear LED lighting with turn signals on rearview mirrors, brake lights, reverse lights and roof lights, functional and switchable via transmitter
• Many graduated accessories such as door handles, roof bars, exterior and interior mirrors are already integrated